PRODUCTION/PRINTING METHODS AND PRODUCTS CERTIFICATES
Direct to Garment (DTG) Printing is an exciting printing method that uses highly modified inkjet printing technology with speciality water-based inkjet textile inks and achieves outstanding results on to most garments.
DTG printing uses water-based inks that are cured within the fabric, leaving an extremely comfortable, soft handed print.
All the fabrics are dyed with GOTS approved chemicals, using low-water and controlled waste discharge processes, certified to OekoTex 100 Class I standard and conforming to REACH.
Organic certified fabrics are dyed in a zero-discharge dyehouse, where all the water is recycled in a closed-loop system.
CARBON FOOTPRINT REDUCTION
The carbon footprint (CO2e) is the total carbon dioxide, methane, nitrous oxide, and other greenhouse gases emitted during the cultivation and harvesting of cotton, fibre processing, textile production, packaging, transportation and warehousing.
EarthPositive® products are manufactured using methods that reduce the carbon footprint by around 90% through a combination of innovative product design, low impact organic agriculture, efficiency in manufacturing, and by replacing standard grid electricity with renewable wind power. Carbon offsets are not used and the footprint calculations are certified by the Carbon Trust Certifications in the U.K.
It has been calculated that a single EarthPositive® T-shirt saves around 7 kilograms of CO2e, whereas a hooded sweatshirt saves up to 28 kgs.
Having taken the greenhouse gas emissions to pre-industrial levels, all the EarthPositive® products carry the registered mark “Climate Neutral”.
FAIR WEAR FOUNDATION FWF
Fair Wear Foundation is an independent, non-profit organization striving to improve working conditions in the textile industry. The foundation is an initiative by trade organizations in the textile sector, trade unions and NGO's.
Fair Wear Foundation verifies that member companies implement a Code of Labour Practice along their supply chain and checks compliance by monitoring audits and remediation efforts. Annual reporting by member companies and by FWF itself promotes transparency at all levels.
GLOBAL ORGANIC TEXTILE STANDARD (GOTS)
The Global Organic Textile Standard (GOTS) is the worldwide leading textile processing standard for organic fibres, including ecological and social criteria, backed up by independent certification of the entire textile supply chain.
The aim of the standard is to define world-wide recognised requirements that ensure organic status of textiles, from harvesting of the raw materials, through environmentally and socially responsible manufacturing up to labelling in order to provide a credible assurance to the end consumer. Textile processors and manufacturers are enabled to export their organic fabrics and garments with one certification accepted in all major markets. Approved are natural fibres that are certified organic and fibres from conversion period certified according to recognised international or national standards and certified by any IFOAM accredited or internationally recognised (according to ISO 65) certifier.
Key criteria for processing and manufacturing include:
- At all stages through the processing organic fibre products must be separated from conventional fibre products and must to be clearly identified
- All chemical inputs (e.g. dyes, auxiliaries and process chemicals) must be evaluated and meeting basic requirements on toxicity and biodegradability/eliminability
- Prohibition of critical inputs such as toxic heavy metals, formaldehyde, aromatic solvents, functional nano particles, genetically modified organisms (GMO) and their enzymes
- The use of synthetic sizing agents is restricted; knitting and weaving oils must not contain heavy metals
- Bleaches must be based on oxygen (no chlorine bleaching)
- Azo dyes that release carcinogenic amine compounds are prohibited
- Discharge printing methods using aromatic solvents and plastisol printing methods using phthalates and PVC are prohibited
- Restrictions for accessories (e.g. no pvc, nickel or chrome permitted)
- All operators must have an environmental policy including target goals and procedures to minimise waste and discharges
- Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. The waste water from all wet processing units must be treated in a functional waste water treatment plant.
- Packaging material must not contain PVC. Paper or cardboard used in packaging material, hang tags, swing tags etc. must be recycled or certified according to FSC or PEFC.
TECHNICAL QUALITY AND HUMAN TOXICITY CRITERIA
- Technical quality parameters must be met (s.a. rubbing, perspiration, light and washing fastness and shrinkage values)
- Raw materials, intermediates, final textile products as well as accessories must meet stringent limits regarding unwanted residues.
MINIMUM SOCIAL CRITERIA
Minimum social criteria based on the key norms of the International Labour Organisation (ILO) must be met by all processors and manufacturers, including at farm level. They must have a social compliance management with defined elements in place to ensure that the social criteria can be met. For adequate implementation and assessment of the following social criteria topics the listed applicable key conventions of the International Labour Organization (ILO) have to be taken as the relevant basis for interpretation.
- Employment is freely chosen
- There is no forced or bonded labour
- Freedom of association and the right to collective bargaining are respected
- Working conditions are safe and hygienic
- Child labour must not be used
- Living wages
- Working hours are not excessive
- No discrimination is practised
- Regular employment is provided
- Harsh or inhumane treatment is prohibited
QUALITY ASSURANCE SYSTEM
Generally a company participating in the GOTS certification scheme must work in compliance with all criteria of the standard. GOTS relies on a dual system to check compliance with the relevant criteria consisting of on-site auditing and residue testing.
Read the full standard here> http://www.global-standard.org/images/GOTS_Version4-01March2014.pdf